Seh-computertechnik ISD300 User Manual download pdf (Page 16)

ISD300 User Manual

Network Settings

3. Enter the Host name (max. 256 characters).

4. Click Set.

How to set Date and Time?

Date and time specifications are necessary if you want to display

the time at which the print job was printed. Date and time

specifications are displayed in the Job History.

Date and time can be entered manually during the Quick Setup

also; see: How to configure via Quick Setup? on page 17.

Date and time can be adjusted manually or obtained from a time

server.

If you use a time server, the manually entered time will be

overwritten by the time provided by the time server.

Proceed as follows:

1. Click Configuration.

2. Click Board Settings.

3. Enter time and date or use a time server; see Table: Parameter

Settings - Board.

4. Click Set.

Table: Parameter Settings - Board

Parameter Description

Default name Default name of the ISD300 set by the manufacturer

Host name Host name of the ISD300 set by the administrator

(max. 256 characters)

Date Date in the format: dd.mm.yyyy (e.g. 23.05.2004)

Time Time in the format: hh:mm (e.g. 16:36)

Time server IP address or the host name of the time server

(e.g. ’ntp1.ptb.de’) The ’ntp’ protocol is used.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 65 66

No comments

Seh-computertechnik ISD300 User Manual Page 16