Seh-computertechnik ISD300 User Manual download pdf (Page 15)

ISD300 User Manual

Network Settings

4. Press to confirm.

Apply|Back appears in the display.

5. Press to confirm.

Upon booting DHCP will be applied automatically. TCP/IP

parameters are assigned by a DHCP server.

Setting TCP/IP parameter via ISD300 Homepage

Proceed as follows:

1. Click Configuration.

2. Click TCP/IP.

3. Enter the TCP/IP paramter manually or enable the ’DHCP’

option; see Table: Parameter Settings - TCP/IP.

4. Click Set.

Table: Parameter Settings - TCP/IP

How to set a Host Name?

You can set a host name for the ISD300. The host name and the IP

address are displayed at the top left side of the browser window.

Proceed as follows:

1. Click Configuration.

2. Click Board Settings.

Parameter Description

IP address IP address of the ISD300 (e.g. 192.168.0.21)

Netmask Netmask

Gateway IP address of the gateway used to access other

networks or subnets. This enables the ISD300 to

communicate with devices on other subnets.

DHCP Enable DHCP to set TCP/IP parameter via DHCP.

The TCP/IP parameters are assigned by a DHCP

server during the next reboot of the ISD300.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 65 66

No comments

Seh-computertechnik ISD300 User Manual Page 15