Seh-computertechnik ISD300 User Manual download pdf (Page 45)

ISD300 User Manual

Using ISD300 as DHCP / DNS Server

Table: Parameter Settings - DHCP Server

Parameter Description

Address ranges

Start Address

End Address

‘IP Address Range’ is the range that supplies

DHCP leases to DHCP clients. Up to four

ranges are supported. These can be used to set

exclusion ranges. When a DHCP range is

created, a ‘Start Address’ and an ‘End Address’

need to be entered. Once created, a range

cannot be modified. To modify range settings,

the range must be deleted and a new range

defined.

Fixed IP addresses

MAC Address

IP-Address

Hostname

Hosts receive their explicitly-reserved IP

addresses from the DHCP server. Up to ten IP

addresses may be reserved. For this, the host

requires the following information:

- MAC Address

- IP-Address

- Hostname

To modify host settings, the host must be

deleted and a new host defined.

DHCP Options

These data are equally used for all ranges and hosts. Several server

addresses are separated by a comma.

Lease time The time, in seconds or hours that a DHCP

lease should be provided a host.

A lease is the length of time that a DHCP server

specifies that a client computer can use an

assigned IP address.

Subnet mask The subnet from which to serve the IP

addresses

Broadcast address Broadcast address

Default routers Default routers

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 65 66

No comments

Seh-computertechnik ISD300 User Manual Page 45